2.2uH, 13A Low Profile High Current Molded Power Inductor | Magnetic components | Transformer, Inductor, Choke Manufacturer | Coilmaster Electronics

Low profile shielded high current power inductor with 4.0mm height and up to 10uH inductance value. Typically the molded power choke need to support a ripple current without saturating. For this SMD molded high current inductor, 2.2uH could carry 13 Amps of saturate current. The core material is low core loss and also excellent temperature stability, the inductance value will be similar from 25℃ to 125℃. It is able to meet the current requirement of high-density which will result in the high internal temperatures. Furthermore, the leakage of magnetic flux and audible buzzing will always be important point when doing the design. The molded power inductor also could avoid these two issues even in the high density mounting. The process of the molded will utilize the high pressure to let the gap between each particles as small as possible. Hence, any vibrations in the winding are restrained by the molded construction and only little leakage of magnetic flux will happen. Coilmaster Electronics is a high-current 2.2uH, 13A Low Profile High Current Molded Power Inductor, 2.2uH, 13A Low Loss Molded Power Inductor manufacturer from Taiwan since 1995. Coilmaster is a professional manufacturer for inductor, common mode choke, chip beads and transformer. Our vision is “Creating high-performance inductors, reducing energy loss, and contributing to sustainable” To achieve this, our engineer team is keen to design the power inductor to have better efficiency. With more than 20 years of experience in magnetic territory, Coilmaster Electronics is specialized in the production of SMD power inductors, common mode choke, high frequency transformers.