0.56uH, 22A Fixed Power Inductor With High Saturation Current | Magnetic components | Transformer, Inductor, Choke Manufacturer | Coilmaster Electronics

SMD Molded Power Inductor SEP1004EC series with 4.0mm height and up to 100uH inductance value. Typically the molded power choke need to support a ripple current without saturating. The core material is low core loss and possess excellent temperature stability, this series utilize the alloy powder and had balanced between current and DCR. The SEP1004EC have the lowest dcr value in the same dimension. The inductance value will be similar from 25℃ to 125℃. It is able to meet the current requirement of high-density which will result in the high internal temperatures, for this molded high current inductor, 0.56uH have 22 Amps of saturate current. Furthermore, the leakage of magnetic flux and audible buzzing will always be important point when doing the design. This molded power inductor is available to minimize these two issues even in the high density mounting. The process of the molded is utilized the high pressure to let the gap between each particles as small as possible. Hence, any vibrations in the winding are restrained by the molded construction and only little leakage of magnetic flux will be happened. Coilmaster Electronics is a high-current 0.56uH, 22A Fixed Power Inductor With High Saturation Current, 0.56uH, 22A Low Loss Molding Power Inductor manufacturer from Taiwan since 1995. Coilmaster is a professional manufacturer for inductor, common mode choke, chip beads and transformer. Our vision is “Creating high-performance inductors, reducing energy loss, and contributing to sustainable” To achieve this, our engineer team is keen to design the power inductor to have better efficiency. With more than 20 years of experience in magnetic territory, Coilmaster Electronics is specialized in the production of SMD power inductors, common mode choke, high frequency transformers.