1.5uH, 30A SMD Molded Inductor With Soft Saturation | Magnetic components | Transformer, Inductor, Choke Manufacturer | Coilmaster Electronics

SMD High Saturate Current Molding Power Inductor SEP1204K series with 4mm height and up to 10uH inductance value. Typically the surface mount molding power choke need to support a ripple current without saturating. The core material is low core loss and possess excellent temperature stability, this series utilize the carbonyl powder to achieve the higher current carry capacity. The inductance value will be similar from 25℃ to 125℃without big different. It is able to meet the current requirement of high-density which will result in the high internal temperatures, for this high performance molded power inductor, 1.5uH have 30 Amps of saturate current. Furthermore, the leakage of magnetic flux and audible buzzing will always be important point when doing the design. This molding SMD power inductors is available to minimize these two issues even in the high density mounting. The process of the molded is utilized the high pressure to let the gap between each particles as small as possible. Hence, any vibrations in the winding are restrained by the molded construction and only little leakage of magnetic flux will be happened. Coilmaster Electronics is a high-current 1.5uH, 30A SMD Molded Inductor With Soft Saturation, 1.5uH, 30A SMD High Current Molding Power Chokes manufacturer from Taiwan since 1995. Coilmaster is a professional manufacturer for inductor, common mode choke, chip beads and transformer. Our vision is “Creating high-performance inductors, reducing energy loss, and contributing to sustainable” To achieve this, our engineer team is keen to design the power inductor to have better efficiency. With more than 20 years of experience in magnetic territory, Coilmaster Electronics is specialized in the production of SMD power inductors, common mode choke, high frequency transformers.